U1115 – OBD-II DTC

OBD-II DTC U1115 – SCP (J1850) Invalid or Missing Data for Charging System

DTC U1115 meaning

DTC U1115 refers to a diagnostic trouble code that indicates an issue with the communication between the vehicle’s charging system and the onboard diagnostic system. Specifically, it signifies that the data related to the charging system is either invalid or missing. This code is associated with the SCP (Single Wire CAN) communication protocol, which is used in some vehicles to transmit data between various modules.

DTC U1115 symptoms

When DTC U1115 is present, the following symptoms may be observed:

• Warning lights on the dashboard, particularly the battery or check engine light.
• Inconsistent or incorrect readings from the voltmeter or ammeter.
• Electrical components may not function properly due to insufficient voltage.
• Possible stalling or difficulty starting the vehicle.

DTC U1115 causes

Several factors can lead to the triggering of DTC U1115, including:

• Faulty charging system components, such as the alternator or voltage regulator.
• Wiring issues, including damaged or corroded connectors and harnesses.
• Malfunctioning battery that cannot hold a charge.
• Software issues within the vehicle’s control modules.
• Faulty sensors that provide data to the charging system.

DTC U1115 seriousness

DTC U1115 can be considered serious as it may indicate a failure in the vehicle’s charging system. If left unaddressed, it can lead to:

• Complete battery drain, resulting in the vehicle becoming inoperable.
• Potential damage to electrical components due to inconsistent voltage.
• Increased risk of being stranded due to starting issues.

How to diagnose DTC U1115

To diagnose DTC U1115, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1115.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the vehicle’s battery and charging system for visible issues.
4. Test the alternator output to ensure it is functioning correctly.
5. Examine wiring and connectors for damage or corrosion.
6. Check the vehicle’s control modules for software updates or faults.

How to fix DTC U1115 step-by-step instructions

To fix DTC U1115, follow these steps:

1. Address any identified issues with the battery, such as replacing it if it is faulty.
2. Repair or replace damaged wiring and connectors in the charging system.
3. Test and replace the alternator or voltage regulator if they are not functioning properly.
4. Update or reprogram the vehicle’s control modules if necessary.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC U1115

To erase DTC U1115, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.