U1130 – OBD-II DTC

OBD-II DTC U1130 – SCP (J1850) Invalid or Missing Data for Fuel System

DTC U1130 meaning

DTC U1130 refers to a communication issue within the vehicle’s onboard diagnostic system, specifically related to the SCP (Serial Communication Protocol) using the J1850 standard. This code indicates that there is invalid or missing data concerning the fuel system, which can affect the vehicle’s performance and emissions control. The fuel system data is crucial for the engine control module (ECM) to make necessary adjustments for optimal operation.

DTC U1130 symptoms

Common symptoms associated with DTC U1130 may include:

• Check Engine Light illuminated
• Decreased engine performance
• Increased fuel consumption
• Rough idling or stalling
• Difficulty starting the engine

DTC U1130 causes

Several factors can lead to the triggering of DTC U1130, including:

• Faulty fuel system sensors
• Wiring issues or damaged connectors in the fuel system
• ECM software glitches or corruption
• Faulty fuel pump or fuel injectors
• Communication issues between modules

DTC U1130 seriousness

DTC U1130 is considered a moderate to serious issue. While it may not cause immediate catastrophic failure, it can lead to poor engine performance, increased emissions, and potential damage to the engine or fuel system components if not addressed promptly. Ignoring this code can result in further complications and costly repairs.

How to diagnose DTC U1130

To diagnose DTC U1130, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1130 code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors related to the fuel system for damage or corrosion.
4. Test the fuel system sensors for proper operation.
5. Verify communication between the ECM and other modules.
6. Check the fuel pump and injectors for functionality.

How to fix DTC U1130 step-by-step instructions

To fix DTC U1130, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the fuel system.
3. Replace any faulty fuel system sensors identified during diagnosis.
4. Update or reprogram the ECM if software issues are detected.
5. Test the fuel pump and injectors, replacing them if necessary.
6. Recheck for DTCs after repairs and ensure the vehicle operates normally.

How to erase DTC U1130

To erase DTC U1130, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the DTC menu on the scanner.
4. Select the option to clear or erase DTCs.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.