U1140 – OBD-II DTC

OBD-II DTC U1140 – SCP (J1850) Invalid or Missing Data for Gateway

DTC U1140 meaning

DTC U1140 refers to a diagnostic trouble code that indicates an issue with the communication between the vehicle’s modules. Specifically, it signifies that there is invalid or missing data for the gateway, which is responsible for facilitating communication between different control modules in the vehicle. This code is associated with the SCP (Standard Corporate Protocol) using the J1850 communication standard.

DTC U1140 symptoms

Common symptoms associated with DTC U1140 may include:

• Warning lights illuminated on the dashboard, such as the check engine light.
• Malfunctioning or inoperative vehicle features that rely on module communication.
• Erratic behavior of electronic systems, such as the radio or climate control.
• Difficulty in starting the vehicle or intermittent starting issues.

DTC U1140 causes

Several factors can lead to the occurrence of DTC U1140, including:

• Faulty or damaged wiring or connectors in the communication network.
• Defective control modules that are unable to send or receive data properly.
• Corrosion or poor connections at the gateway module.
• Software issues or bugs within the vehicle’s control modules.
• Interference from aftermarket devices or modifications that disrupt communication.

DTC U1140 seriousness

The seriousness of DTC U1140 can vary depending on the specific symptoms and the vehicle’s reliance on the affected systems. While it may not immediately affect the vehicle’s drivability, it can lead to more significant issues if left unaddressed. It is advisable to diagnose and repair the issue promptly to avoid potential safety concerns or further damage to the vehicle’s electronic systems.

How to diagnose DTC U1140

To diagnose DTC U1140, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1140 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the gateway module for damage or corrosion.
4. Test the gateway module for proper operation and communication with other modules.
5. Examine the vehicle’s communication network for any interruptions or faults.
6. Review the vehicle’s service history for any recent repairs or modifications that could affect communication.

How to fix DTC U1140 step-by-step instructions

To fix DTC U1140, follow these step-by-step instructions:

1. Begin by addressing any wiring or connector issues found during diagnosis.
2. If the gateway module is faulty, replace it with a new or refurbished unit.
3. Clear any corrosion from connectors and ensure all connections are secure.
4. Update the software of the control modules if necessary, following manufacturer guidelines.
5. Reconnect any aftermarket devices that may have been removed during diagnosis.
6. Perform a thorough test of the vehicle’s systems to ensure proper communication is restored.

How to erase DTC U1140

To erase DTC U1140 from the vehicle’s memory, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.