U1169 – OBD-II DTC

OBD-II DTC U1169 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1169 meaning

DTC U1169 refers to a diagnostic trouble code that indicates an issue with the communication between modules in a vehicle’s network. Specifically, it signifies that there is invalid or missing data for the primary identifier in the SCP (Standard Corporate Protocol) communication system, which operates on the J1850 protocol. This can affect the vehicle’s ability to relay important information between various electronic control units (ECUs).

DTC U1169 symptoms

Common symptoms associated with DTC U1169 may include:

• Malfunction indicator lamp (MIL) illuminated
• Loss of communication with certain modules
• Erratic or non-functional vehicle features (e.g., power windows, locks)
• Inconsistent readings from the vehicle’s gauges
• Possible performance issues or reduced engine power

DTC U1169 causes

Several factors can lead to the occurrence of DTC U1169, including:

• Faulty wiring or connectors in the SCP network
• Defective electronic control unit (ECU)
• Corrupted software or firmware in one of the modules
• Interference from aftermarket devices or modifications
• Low battery voltage or poor ground connections

DTC U1169 seriousness

The seriousness of DTC U1169 can vary depending on the specific symptoms and the vehicle’s overall condition. While it may not immediately affect drivability, it can lead to:

• Increased risk of further electrical issues
• Potential safety concerns if critical systems are affected
• Inability to perform certain diagnostic tests

It is advisable to address this code promptly to prevent further complications.

How to diagnose DTC U1169

To diagnose DTC U1169, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1169.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the SCP network for damage or corrosion.
4. Verify the battery voltage and ground connections.
5. Test the affected modules for proper operation and communication.
6. Check for software updates or reprogramming needs for the ECUs.

How to fix DTC U1169 step-by-step instructions

To fix DTC U1169, follow these steps:

1. Repair or replace any damaged wiring or connectors in the SCP network.
2. Ensure all ground connections are secure and free of corrosion.
3. Replace any faulty electronic control units as necessary.
4. Update or reprogram the software in the affected modules if required.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the issue is resolved.

How to erase DTC U1169

To erase DTC U1169, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.