U1190 – OBD-II DTC

OBD-II DTC U1190 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1190 meaning

DTC U1190 refers to a diagnostic trouble code indicating “Invalid or Missing Data for Primary Id” in vehicles using the SCP (J1850) communication protocol. This code suggests that the vehicle’s onboard diagnostic system has detected an issue with the data being transmitted or received from a primary module, which is essential for proper vehicle operation.

DTC U1190 symptoms

Common symptoms associated with DTC U1190 may include:

• Illumination of the check engine light
• Erratic or non-functional vehicle systems
• Communication issues between modules
• Loss of certain vehicle features or functions

DTC U1190 causes

Several factors can lead to the triggering of DTC U1190, including:

• Faulty or damaged wiring in the SCP network
• Defective or malfunctioning control modules
• Corroded or loose connectors
• Software issues within the vehicle’s control modules
• Interference from aftermarket devices

DTC U1190 seriousness

The seriousness of DTC U1190 can vary, but it is generally considered a moderate issue. While it may not immediately affect the drivability of the vehicle, it can lead to further complications if not addressed. Ignoring this code may result in additional diagnostic trouble codes and potential failures in vehicle systems.

How to diagnose DTC U1190

To diagnose DTC U1190, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1190.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the SCP network for damage or corrosion.
4. Test the affected control modules for proper operation.
5. Verify the integrity of the communication network using a multimeter.

How to fix DTC U1190 step-by-step instructions

To fix DTC U1190, follow these steps:

1. Repair or replace any damaged wiring or connectors found during diagnosis.
2. Replace any faulty control modules identified in the diagnostic process.
3. Update the software of the control modules if necessary.
4. Clear any aftermarket devices that may be causing interference.
5. Re-scan the vehicle to ensure DTC U1190 is no longer present.

How to erase DTC U1190

To erase DTC U1190, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and take the vehicle for a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.