U1193 – OBD-II DTC

OBD-II DTC U1193 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1193 meaning

DTC U1193 refers to a diagnostic trouble code that indicates an issue with the communication between the vehicle’s modules. Specifically, it signifies that there is invalid or missing data for the primary identifier in the SCP (Serial Communication Protocol) using the J1850 communication standard. This can affect the vehicle’s ability to relay important information between various electronic control units (ECUs).

DTC U1193 symptoms

Common symptoms associated with DTC U1193 may include:

• Illumination of the check engine light
• Loss of communication with certain vehicle modules
• Erratic behavior of electronic components
• Inconsistent readings from sensors
• Possible performance issues or reduced functionality of vehicle systems

DTC U1193 causes

Several factors can lead to the occurrence of DTC U1193, including:

• Faulty wiring or connectors in the communication network
• Defective electronic control unit (ECU)
• Software glitches or programming errors in the vehicle’s modules
• Interference from aftermarket devices or modifications
• Corrosion or damage to the vehicle’s electrical system

DTC U1193 seriousness

The seriousness of DTC U1193 can vary depending on the specific symptoms and the vehicle’s overall condition. While it may not immediately affect drivability, it can lead to:

• Inability to diagnose other related issues due to communication failures
• Potential safety concerns if critical systems are affected
• Increased repair costs if left unaddressed

How to diagnose DTC U1193

To diagnose DTC U1193, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1193.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the vehicle’s wiring and connectors related to the SCP network for damage or corrosion.
4. Test the affected electronic control units for proper operation.
5. Verify the integrity of the communication lines using a multimeter.
6. Check for software updates or reprogramming needs for the ECUs.

How to fix DTC U1193 step-by-step instructions

To fix DTC U1193, follow these steps:

1. Repair or replace any damaged wiring or connectors found during diagnosis.
2. If a faulty ECU is identified, replace it with a compatible unit.
3. Reprogram or update the software of the affected modules as necessary.
4. Clear any aftermarket devices that may interfere with the communication network.
5. Reconnect all components and ensure proper connections are made.
6. Perform a test drive to verify that the issue has been resolved and that no new codes appear.

How to erase DTC U1193

To erase DTC U1193 from the vehicle’s memory, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and perform a test drive to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.