U1207 – OBD-II DTC

OBD-II DTC U1207 – SCP (J1850) Invalid or Missing Data for Primary Id

DTC U1207 meaning

DTC U1207 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for Primary Id.” This code is part of the OBD-II system and is associated with the SCP (Serial Communication Protocol) using the J1850 standard. It suggests that the vehicle’s control modules are unable to communicate properly, leading to a lack of essential data transmission.

DTC U1207 symptoms

Common symptoms associated with DTC U1207 may include:

• Illumination of the Check Engine Light (CEL)
• Loss of communication with certain modules
• Erratic behavior of vehicle systems
• Inconsistent readings from sensors
• Possible performance issues or reduced functionality

DTC U1207 causes

Several factors can lead to the occurrence of DTC U1207, including:

• Faulty wiring or connectors in the communication network
• Defective control modules
• Corrosion or damage to the connectors
• Software issues or bugs in the control modules
• Interference from aftermarket devices or modifications

DTC U1207 seriousness

The seriousness of DTC U1207 can vary based on the symptoms present. While it may not immediately affect the vehicle’s drivability, it can lead to more significant issues if left unaddressed. Communication failures can hinder the performance of critical systems, potentially resulting in safety concerns or further damage to the vehicle.

How to diagnose DTC U1207

To diagnose DTC U1207, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Check for any additional DTCs that may provide more context.
3. Inspect the vehicle’s wiring and connectors for damage or corrosion.
4. Verify the functionality of the control modules involved in the communication network.
5. Perform a visual inspection of the SCP network for any loose connections.
6. Check for software updates or reprogramming needs for the control modules.

How to fix DTC U1207 step-by-step instructions

To fix DTC U1207, follow these steps:

1. Identify and repair any damaged wiring or connectors in the communication network.
2. Replace any faulty control modules as necessary.
3. Clean any corroded connectors to ensure proper communication.
4. Update or reprogram the control modules if software issues are detected.
5. Disconnect any aftermarket devices that may interfere with the communication network.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC U1207

To erase DTC U1207, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the DTC menu on the scanner and locate DTC U1207.
4. Select the option to clear or erase the DTC.
5. Turn off the ignition and disconnect the scanner.
6. Start the vehicle and monitor for the reappearance of the DTC.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.