U1210 – OBD-II DTC

OBD-II DTC U1210 – SCP (J1850) Invalid or Missing Data for Restraints

DTC U1210 meaning

DTC U1210 refers to a communication issue within the vehicle’s network, specifically related to the Restraint Control Module (RCM). This code indicates that the data being transmitted over the SCP (Single Wire CAN) network, which follows the J1850 protocol, is either invalid or missing. The RCM is responsible for managing the airbag system and other safety features, making this code critical for vehicle safety.

DTC U1210 symptoms

Common symptoms associated with DTC U1210 may include:

• Illumination of the airbag warning light on the dashboard
• Inconsistent or non-functional airbag deployment
• Possible issues with other restraint systems, such as seatbelt pretensioners
• Diagnostic trouble codes related to the airbag system

DTC U1210 causes

Several factors can lead to the occurrence of DTC U1210, including:

• Faulty Restraint Control Module (RCM)
• Wiring issues, such as damaged or corroded connectors
• Faulty sensors or components within the airbag system
• Communication issues within the vehicle’s network
• Software glitches or outdated firmware in the RCM

DTC U1210 seriousness

DTC U1210 is considered a serious issue because it directly affects the vehicle’s safety systems. If the airbag system is not functioning correctly, it may not deploy in the event of a collision, increasing the risk of injury to occupants. Therefore, it is crucial to address this code promptly to ensure the safety of the vehicle’s occupants.

How to diagnose DTC U1210

To diagnose DTC U1210, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1210.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors related to the RCM for damage or corrosion.
4. Test the RCM for proper operation using manufacturer-specific diagnostic tools.
5. Verify the functionality of related sensors and components.
6. Check for software updates or reprogramming needs for the RCM.

How to fix DTC U1210 step-by-step instructions

To fix DTC U1210, follow these steps:

1. Address any wiring issues by repairing or replacing damaged connectors and wires.
2. If the RCM is faulty, replace it with a new or refurbished unit.
3. Ensure all related sensors and components are functioning correctly replace any that are defective.
4. Update or reprogram the RCM software if necessary.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.