U1235 – OBD-II DTC

OBD-II DTC U1235 – SCP (J1850) Invalid or Missing Data for Displays

DTC U1235 meaning

DTC U1235 refers to a communication issue within the vehicle’s network, specifically indicating “Invalid or Missing Data for Displays.” This code is associated with the SCP (Serial Communication Protocol) using the J1850 standard. It suggests that the data required for certain displays, such as the instrument cluster or other modules, is either not being received or is corrupted.

DTC U1235 symptoms

Common symptoms associated with DTC U1235 may include:

• Malfunctioning or blank instrument cluster displays
• Erratic behavior of warning lights
• Inaccurate readings from gauges
• Loss of communication with certain modules
• Potential issues with other vehicle systems that rely on the affected displays

DTC U1235 causes

Several factors can lead to the triggering of DTC U1235, including:

• Faulty wiring or connectors in the communication network
• Defective modules that are not transmitting data correctly
• Corrupted software or firmware in the affected modules
• Interference from aftermarket devices or modifications
• Low battery voltage or poor ground connections

DTC U1235 seriousness

DTC U1235 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s drivability, it can lead to significant problems with the instrument cluster and other systems. Ignoring this code can result in further complications, including safety concerns if critical information is not displayed correctly.

How to diagnose DTC U1235

To diagnose DTC U1235, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1235 code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors related to the SCP network for damage or corrosion.
4. Verify the battery voltage and ground connections to ensure they are within specifications.
5. Test the affected modules for proper operation and communication.
6. Check for software updates or reprogramming needs for the modules involved.

How to fix DTC U1235 step-by-step instructions

To fix DTC U1235, follow these steps:

1. Repair or replace any damaged wiring or connectors found during the inspection.
2. Ensure all ground connections are clean and secure.
3. Replace any faulty modules that are not communicating properly.
4. Update or reprogram the software in the affected modules if necessary.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the fix.
6. Monitor the system for any reoccurrence of the code.

How to erase DTC U1235

To erase DTC U1235, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the DTC menu on the scanner and locate the U1235 code.
4. Select the option to clear or erase the DTC.
5. Turn off the ignition and disconnect the scanner.
6. Start the vehicle and check if the code reappears after a test drive.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.