U1237 – OBD-II DTC

OBD-II DTC U1237 – SCP (J1850) Invalid or Missing Data for Memory Storage

DTC U1237 meaning

DTC U1237 refers to a diagnostic trouble code indicating “Invalid or Missing Data for Memory Storage” in vehicles using the SCP (J1850) communication protocol. This code typically signifies that the vehicle’s onboard diagnostic system has detected an issue with the data being transmitted or received, particularly related to memory storage functions. It suggests that the data expected from a specific module is either not present or is corrupted, which can affect various systems within the vehicle.

DTC U1237 symptoms

Common symptoms associated with DTC U1237 may include:

• Illumination of the check engine light
• Erratic behavior of electronic components
• Loss of communication with certain modules
• Inconsistent readings from sensors
• Potential issues with vehicle performance

DTC U1237 causes

Several factors can lead to the triggering of DTC U1237, including:

• Faulty or damaged wiring and connectors
• Defective control modules
• Corrupted software or firmware in the vehicle’s modules
• Issues with the vehicle’s battery or charging system
• Interference from aftermarket devices or modifications

DTC U1237 seriousness

The seriousness of DTC U1237 can vary based on the underlying cause. While it may not immediately affect the drivability of the vehicle, it can lead to more significant issues if left unaddressed. It is essential to diagnose and resolve the problem to ensure proper functioning of the vehicle’s electronic systems and to prevent further complications.

How to diagnose DTC U1237

To diagnose DTC U1237, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect wiring and connectors related to the affected modules for damage or corrosion.
4. Test the affected control modules for proper operation.
5. Verify the vehicle’s battery and charging system are functioning correctly.
6. Check for software updates or reprogramming needs for the modules.

How to fix DTC U1237 step-by-step instructions

To fix DTC U1237, follow these step-by-step instructions:

1. Address any wiring or connector issues found during diagnosis.
2. Replace or repair any faulty control modules as necessary.
3. Update or reprogram the software in the affected modules if required.
4. Ensure the vehicle’s battery and charging system are in good condition.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the issue is resolved.

How to erase DTC U1237

To erase DTC U1237, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.