U1260 – OBD-II DTC

OBD-II DTC U1260 – SCP (J1850) Single Ended (+) Circuit Failure

DTC U1260 meaning

DTC U1260 refers to a diagnostic trouble code indicating a failure in the Single Ended (+) circuit of the SCP (Serial Communication Protocol) using the J1850 communication standard. This code is typically set when the vehicle’s onboard computer detects a communication issue between modules, specifically related to the positive circuit of the SCP network.

DTC U1260 symptoms

Common symptoms associated with DTC U1260 may include:

• Malfunctioning or inoperative vehicle systems
• Warning lights illuminated on the dashboard
• Loss of communication with certain modules
• Erratic behavior of electronic components

DTC U1260 causes

Several factors can lead to the triggering of DTC U1260, including:

• Faulty wiring or connectors in the SCP circuit
• Defective electronic control modules (ECMs)
• Corrosion or damage to the circuit connections
• Interference from aftermarket devices

DTC U1260 seriousness

DTC U1260 is considered a serious issue as it can affect the communication between critical vehicle systems. If left unaddressed, it may lead to further electrical problems, reduced vehicle performance, or even safety concerns due to malfunctioning systems.

How to diagnose DTC U1260

To diagnose DTC U1260, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U1260 code.
2. Inspect the wiring and connectors related to the SCP circuit for any visible damage or corrosion.
3. Check for any additional DTCs that may provide more context to the issue.
4. Test the voltage and continuity of the Single Ended (+) circuit.
5. Examine the electronic control modules for proper operation and communication.

How to fix DTC U1260 step-by-step instructions

To fix DTC U1260, follow these steps:

1. Repair or replace any damaged wiring or connectors found during the inspection.
2. Clear any corrosion from connectors and ensure a secure fit.
3. If necessary, replace any faulty electronic control modules.
4. Recheck the voltage and continuity of the SCP circuit after repairs.
5. Use an OBD-II scanner to clear the DTC and test drive the vehicle to ensure the issue is resolved.

How to erase DTC U1260

To erase DTC U1260, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.