U1262 – OBD-II DTC

OBD-II DTC U1262 – SCP (J1850) Communication Bus Fault

DTC U1262 meaning

DTC U1262 refers to a communication bus fault within the SCP (Standard Corporate Protocol) network, specifically using the J1850 protocol. This code indicates that there is a problem with the communication between various modules in the vehicle, which can lead to a loss of data transmission. The SCP network is responsible for facilitating communication between different electronic control units (ECUs) in the vehicle, such as the engine control module, transmission control module, and other systems.

DTC U1262 symptoms

Common symptoms associated with DTC U1262 may include:

• Illumination of the check engine light
• Loss of communication with certain modules
• Erratic behavior of vehicle systems (e.g., power windows, locks)
• Inconsistent performance of the engine or transmission
• Diagnostic tools unable to communicate with the vehicle

DTC U1262 causes

Several factors can contribute to the occurrence of DTC U1262, including:

• Faulty wiring or connectors in the SCP network
• Defective electronic control units (ECUs)
• Corrosion or damage to the communication bus
• Interference from aftermarket devices or modifications
• Software issues within the modules

DTC U1262 seriousness

DTC U1262 can be considered a serious issue as it affects the communication between critical vehicle systems. If left unaddressed, it may lead to further complications, such as:

• Inability to diagnose other DTCs
• Potential safety hazards due to malfunctioning systems
• Increased risk of vehicle breakdown

How to diagnose DTC U1262

To diagnose DTC U1262, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U1262.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors associated with the SCP network for damage or corrosion.
4. Test the continuity and resistance of the communication lines.
5. Verify the functionality of the involved ECUs.
6. Check for software updates or reprogramming needs for the modules.

How to fix DTC U1262 step-by-step instructions

To fix DTC U1262, follow these steps:

1. Repair or replace any damaged wiring or connectors in the SCP network.
2. Replace any faulty electronic control units (ECUs) as necessary.
3. Clean any corrosion found on connectors and terminals.
4. Ensure that all modules are properly grounded and powered.
5. Reprogram or update the software in the affected modules if needed.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC U1262

To erase DTC U1262, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.