OBD-II DTC U1750 – SCP (J1850) Lack of Acknowledgment for Audible Warnings
DTC U1750 meaning
DTC U1750 refers to a communication issue within the vehicle’s network, specifically related to the SCP (Single Wire CAN) protocol. This code indicates a lack of acknowledgment for audible warnings, meaning that the system is not receiving the expected response from the module responsible for generating audible alerts. This can affect the vehicle’s ability to notify the driver of important warnings or alerts.
DTC U1750 symptoms
Common symptoms associated with DTC U1750 may include:
- No audible warnings or alerts when needed.
- Dashboard warning lights may illuminate without accompanying sounds.
- Possible malfunctions in other communication-related systems.
- Inconsistent operation of warning chimes or alerts.
DTC U1750 causes
Several factors can lead to the triggering of DTC U1750, including:
- Faulty wiring or connectors in the SCP network.
- Malfunctioning audible warning module.
- Software issues within the vehicle’s control modules.
- Corrosion or damage to the connectors or terminals.
DTC U1750 seriousness
The seriousness of DTC U1750 can vary, but it is generally considered a moderate issue. While the vehicle may still operate normally, the lack of audible warnings can pose safety risks, as the driver may not be alerted to critical issues. It is advisable to address this code promptly to ensure all warning systems function correctly.
How to diagnose DTC U1750
To diagnose DTC U1750, follow these steps:
- Use an OBD-II scanner to confirm the presence of the U1750 code.
- Inspect the wiring and connectors related to the SCP network for damage or corrosion.
- Check the functionality of the audible warning module.
- Review any related DTCs that may provide additional context.
- Perform a visual inspection of the vehicle’s electrical system for any obvious issues.
How to fix DTC U1750 step-by-step instructions
To fix DTC U1750, follow these step-by-step instructions:
- Clear the DTC using an OBD-II scanner.
- Inspect and repair any damaged wiring or connectors in the SCP network.
- Test the audible warning module for proper operation and replace if necessary.
- Update the vehicle’s software if applicable.
- Recheck the system for any new or recurring DTCs after repairs.
How to erase DTC U1750
To erase DTC U1750, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn the ignition to the “On” position without starting the engine.
- Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
- Confirm the action to clear the codes.
- Disconnect the scanner and start the vehicle to ensure the code does not return.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.