U2012 – OBD-II DTC

OBD-II DTC U2012 – Communication Bus Error (Non SCP)

DTC U2012 meaning

DTC U2012 refers to a communication bus error that occurs in vehicles equipped with the On-Board Diagnostics II (OBD-II) system. This specific code indicates a failure in the communication between modules on the vehicle’s network, which is not using the Standard Corporate Protocol (SCP). The error suggests that one or more control modules are unable to communicate effectively, leading to potential issues in vehicle performance and functionality.

DTC U2012 symptoms

Common symptoms associated with DTC U2012 may include:

• Warning lights illuminated on the dashboard, such as the check engine light.
• Malfunctioning of various electronic systems, such as power windows or door locks.
• Erratic behavior of the vehicle’s performance, including stalling or hesitation.
• Inability to access certain vehicle features or settings.

DTC U2012 causes

Several factors can lead to the occurrence of DTC U2012, including:

• Faulty wiring or connectors in the communication bus.
• Defective control modules that are unable to send or receive data.
• Corrosion or damage to the connectors or terminals.
• Interference from aftermarket devices or modifications.

DTC U2012 seriousness

The seriousness of DTC U2012 can vary depending on the specific symptoms and the affected systems. While it may not immediately affect the vehicle’s drivability, it can lead to more significant issues if left unaddressed. Continuous communication failures can result in the malfunction of critical systems, potentially compromising safety and performance.

How to diagnose DTC U2012

To diagnose DTC U2012, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U2012 code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors associated with the communication bus for damage or corrosion.
4. Test the affected control modules for proper operation.
5. Verify the integrity of the vehicle’s electrical system, including battery voltage and ground connections.

How to fix DTC U2012 step-by-step instructions

To fix DTC U2012, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the communication bus.
3. Replace any faulty control modules identified during diagnosis.
4. Ensure all ground connections are secure and free of corrosion.
5. Reconnect any disconnected modules and ensure proper communication is established.
6. Re-scan the vehicle to confirm that the DTC has not returned.

How to erase DTC U2012

To erase DTC U2012, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase DTCs.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.