U2015 – OBD-II DTC

OBD-II DTC U2015 – Signal Link Fault (Non SCP)

DTC U2015 meaning

DTC U2015 refers to a “Signal Link Fault” that occurs in a vehicle’s communication network. This code indicates that there is a problem with the communication between modules in the vehicle, specifically in systems that do not use the Standard Corporate Protocol (SCP). The fault can disrupt the normal operation of various electronic components and systems within the vehicle.

DTC U2015 symptoms

Common symptoms associated with DTC U2015 may include:

• Warning lights illuminated on the dashboard
• Malfunctioning electronic components
• Loss of communication with certain modules
• Erratic behavior of vehicle systems
• Increased fuel consumption

DTC U2015 causes

Several factors can lead to the occurrence of DTC U2015, including:

• Faulty wiring or connectors in the communication network
• Defective control modules
• Corrosion or damage to connectors
• Software issues within the vehicle’s modules
• Interference from aftermarket devices

DTC U2015 seriousness

DTC U2015 is considered a moderate to serious issue. While it may not immediately affect the drivability of the vehicle, it can lead to further complications if not addressed. The communication failure can result in malfunctioning systems, which may compromise safety features and overall vehicle performance.

How to diagnose DTC U2015

To diagnose DTC U2015, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors related to the affected modules for damage or corrosion.
4. Test the affected modules for proper operation.
5. Review the vehicle’s service history for any previous issues related to communication faults.

How to fix DTC U2015 step-by-step instructions

To fix DTC U2015, follow these steps:

1. Inspect and repair any damaged wiring or connectors in the communication network.
2. Replace any faulty control modules as necessary.
3. Clean any corroded connectors to ensure proper electrical contact.
4. Update the software in the affected modules if applicable.
5. Disconnect any aftermarket devices that may interfere with the communication network.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC U2015

To erase DTC U2015, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the DTC.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.