U2017 – OBD-II DTC

OBD-II DTC U2017 – Driver Side Crash Sensor Communication Fault (Non SCP)

DTC U2017 meaning

DTC U2017 refers to a communication fault related to the driver side crash sensor in a vehicle’s airbag system. This code indicates that the powertrain control module (PCM) is unable to communicate with the driver side crash sensor, which is crucial for the proper deployment of airbags during a collision. The “U” in the code signifies that it is a network communication issue, and “2017” specifies the particular fault related to the driver side sensor.

DTC U2017 symptoms

Common symptoms associated with DTC U2017 may include:

• Illumination of the airbag warning light on the dashboard
• Possible malfunction of the airbag system
• Increased risk of airbag failure during a crash
• Diagnostic trouble codes related to airbag or crash sensor issues

DTC U2017 causes

Several factors can lead to the occurrence of DTC U2017, including:

• Faulty driver side crash sensor
• Wiring issues, such as damaged or corroded connectors
• Faulty PCM or software issues
• Electrical interference or short circuits in the communication network
• Improper installation or disconnection of the crash sensor

DTC U2017 seriousness

DTC U2017 is considered a serious issue as it directly affects the vehicle’s airbag system. If the crash sensor is not functioning correctly, it may lead to the airbags not deploying in the event of a collision, increasing the risk of injury to the occupants. Therefore, it is crucial to address this code promptly to ensure the safety features of the vehicle are operational.

How to diagnose DTC U2017

To diagnose DTC U2017, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC U2017.
2. Inspect the driver side crash sensor and its wiring for any visible damage or disconnections.
3. Check the vehicle’s communication network for any other related DTCs.
4. Test the crash sensor using a multimeter to ensure it is functioning within specifications.
5. Verify the integrity of the PCM and check for any software updates or faults.

How to fix DTC U2017 step-by-step instructions

To fix DTC U2017, follow these step-by-step instructions:

1. Begin by addressing any wiring issues found during diagnosis, such as repairing or replacing damaged wires and connectors.
2. If the crash sensor is faulty, replace it with a new, compatible sensor.
3. Ensure that all connections are secure and properly installed.
4. Clear any existing DTCs using an OBD-II scanner.
5. Perform a test drive to verify that the airbag system is functioning correctly and that the DTC does not reappear.

How to erase DTC U2017

To erase DTC U2017, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.