U2150 – OBD-II DTC

OBD-II DTC U2150 – SCP (J1850) Invalid Data from REM

DTC U2150 meaning

DTC U2150 refers to a diagnostic trouble code indicating “Invalid Data from REM” in vehicles using the SCP (J1850) communication protocol. The REM, or Rear Electronic Module, is responsible for controlling various rear-end functions such as lighting and sensors. This code suggests that the data being received from the REM is not valid or is corrupted, which can affect the vehicle’s performance and functionality.

DTC U2150 symptoms

Common symptoms associated with DTC U2150 may include:

• Malfunctioning rear lights or indicators
• Inconsistent operation of rear sensors
• Warning lights illuminated on the dashboard
• Loss of functionality in rear electronic features
• Possible communication issues with other modules

DTC U2150 causes

Several factors can lead to the occurrence of DTC U2150, including:

• Faulty Rear Electronic Module (REM)
• Wiring issues, such as damaged or corroded connectors
• Short circuits or open circuits in the SCP communication lines
• Software glitches or outdated firmware in the REM
• Interference from other electronic components in the vehicle

DTC U2150 seriousness

The seriousness of DTC U2150 can vary. While it may not immediately affect the drivability of the vehicle, it can lead to safety concerns if rear lights or sensors fail to operate correctly. Ignoring this code can result in further electrical issues or damage to the REM, potentially leading to more costly repairs.

How to diagnose DTC U2150

To diagnose DTC U2150, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U2150 code.
2. Inspect the wiring and connectors related to the REM for any visible damage or corrosion.
3. Check for any additional DTCs that may provide more context to the issue.
4. Test the functionality of the REM by performing a visual inspection of the rear lights and sensors.
5. Use a multimeter to check the voltage and continuity of the SCP communication lines.
6. Consider updating the REM software if applicable.

How to fix DTC U2150 step-by-step instructions

To fix DTC U2150, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the REM.
3. Replace the REM if it is found to be faulty after testing.
4. Ensure all related components are functioning correctly.
5. Re-scan the vehicle to check if the DTC reappears.
6. Test drive the vehicle to confirm that the issue has been resolved.

How to erase DTC U2150

To erase DTC U2150, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the “Erase Codes” or “Clear DTCs” function on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and monitor for any reoccurrence of the DTC.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.