U2152 – OBD-II DTC

OBD-II DTC U2152 – SCP (J1850) Invalid Data from GEM

DTC U2152 meaning

DTC U2152 refers to an issue with the communication between the vehicle’s modules, specifically indicating “Invalid Data from GEM” (Generic Electronic Module). This code is part of the On-Board Diagnostics II (OBD-II) system and is associated with the SCP (Standard Corporate Protocol) communication protocol, which is used in some Ford vehicles. The GEM is responsible for controlling various functions such as lighting, door locks, and other convenience features. When the PCM (Powertrain Control Module) detects invalid or corrupted data from the GEM, it triggers this diagnostic trouble code.

DTC U2152 symptoms

Common symptoms associated with DTC U2152 may include:

• Malfunctioning electrical components (e.g., lights, locks)
• Inconsistent operation of convenience features
• Warning lights illuminated on the dashboard
• Possible loss of communication with other modules

DTC U2152 causes

Several factors can lead to the triggering of DTC U2152, including:

• Faulty GEM module
• Wiring issues or damaged connectors in the communication circuit
• Corrupted software or firmware in the GEM
• Interference from aftermarket accessories
• Low battery voltage or poor ground connections

DTC U2152 seriousness

DTC U2152 can be considered a moderate to serious issue, as it may affect the functionality of various electrical components in the vehicle. While it may not immediately impact drivability, it can lead to safety concerns if critical systems fail to operate correctly. Addressing this code promptly is advisable to ensure all vehicle systems function as intended.

How to diagnose DTC U2152

To diagnose DTC U2152, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the U2152 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the GEM for any visible damage or corrosion.
4. Test the GEM module for proper operation using a multimeter.
5. Verify the battery voltage and ground connections to ensure they are within specifications.
6. Check for any aftermarket accessories that may interfere with the GEM’s operation.

How to fix DTC U2152 step-by-step instructions

To fix DTC U2152, follow these steps:

1. Repair or replace any damaged wiring or connectors found during the inspection.
2. If the GEM is faulty, replace it with a new or refurbished module.
3. Reprogram the new GEM if necessary, following the manufacturer’s guidelines.
4. Clear the DTC using an OBD-II scanner.
5. Test the vehicle to ensure all systems are functioning correctly and the code does not return.

How to erase DTC U2152

To erase DTC U2152, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the “Erase Codes” or “Clear DTCs” function on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.