U2195 – OBD-II DTC

OBD-II DTC U2195 – SCP (J1850) Invalid Data from SCLM

DTC U2195 meaning

DTC U2195 refers to a diagnostic trouble code that indicates an issue with the communication between the vehicle’s modules, specifically related to the Smart Control Link Module (SCLM). The code signifies that invalid data has been received from the SCLM over the SCP (J1850) communication protocol. This can affect various systems within the vehicle that rely on accurate data from the SCLM.

DTC U2195 symptoms

Common symptoms associated with DTC U2195 may include:

• Warning lights illuminated on the dashboard
• Malfunctioning features controlled by the SCLM
• Erratic behavior of vehicle systems
• Loss of communication with other modules

DTC U2195 causes

Several factors can lead to the triggering of DTC U2195, including:

• Faulty SCLM
• Wiring issues, such as damaged or corroded connectors
• Software glitches in the vehicle’s control modules
• Interference from aftermarket devices

DTC U2195 seriousness

The seriousness of DTC U2195 can vary depending on the symptoms and the systems affected. While it may not pose an immediate safety risk, it can lead to:

• Inoperable vehicle features
• Increased difficulty in diagnosing other related issues
• Potential for further damage to the vehicle’s electrical systems if left unaddressed

How to diagnose DTC U2195

To diagnose DTC U2195, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the SCLM for damage or corrosion.
4. Test the SCLM for proper operation using manufacturer-specific diagnostic tools.
5. Review the vehicle’s service history for any previous repairs that may relate to the issue.

How to fix DTC U2195 step-by-step instructions

To fix DTC U2195, follow these step-by-step instructions:

1. Address any wiring or connector issues found during diagnosis.
2. If the SCLM is faulty, replace it with a new or refurbished unit.
3. Reprogram the new SCLM if necessary, following manufacturer guidelines.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the DTC does not reappear.

How to erase DTC U2195

To erase DTC U2195, perform the following steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to check for any reoccurrence of the code.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.