Subaru OBD-II 1996 & Newer models DTC P1244 – Wastegate control solenoid valve malfunction (low input)
DTC P1244 meaning on Subaru OBD-II 1996 & Newer models
The Diagnostic Trouble Code (DTC) P1244 for Subaru OBD-II 1996 & Newer models indicates a malfunction in the wastegate control solenoid valve with a low input signal.
Subaru OBD-II 1996 & Newer models DTC P1244 symptoms
- Check Engine Light (CEL) illuminated on the dashboard
- Reduced engine power or performance
- Possible turbocharger underboost condition
Subaru OBD-II 1996 & Newer models DTC P1244 causes
- Wastegate control solenoid valve failure
- Wiring or connector issues in the wastegate control circuit
- ECU (Engine Control Unit) malfunction
Subaru OBD-II 1996 & Newer models DTC P1244 seriousness
The seriousness of DTC P1244 on Subaru OBD-II 1996 & Newer models can vary. If left unresolved, it can lead to reduced engine performance and potential long-term damage to the turbocharger system.
How to diagnose DTC P1244 on Subaru OBD-II 1996 & Newer models
- Use an OBD-II scanner to retrieve the specific DTC code
- Inspect the wastegate control solenoid valve and its wiring for any visible damage
- Check the ECU for any stored fault codes related to the wastegate control system
How to fix DTC P1244 on Subaru OBD-II 1996 & Newer models
- Replace the wastegate control solenoid valve if it is found to be faulty
- Repair any damaged wiring or connectors in the wastegate control circuit
- If ECU malfunction is suspected, consult a professional for further diagnosis and repair
How to erase DTC P1244 on Subaru OBD-II 1996 & Newer models
To erase the DTC P1244 code on Subaru OBD-II 1996 & Newer models, you can use an OBD-II scanner to clear the code after the underlying issue has been resolved. This will reset the Check Engine Light and remove the stored fault code from the ECU memory.