B2187 – Chevrolet Corvette C5 DTC

Chevrolet Corvette C5 DTC B2187 – Seat Rear Down Switch Shorted to Ground

DTC B2187 meaning on Chevrolet Corvette C5

DTC B2187 on a Chevrolet Corvette C5 indicates that the Seat Rear Down Switch is shorted to ground. This means that there is an electrical issue with the switch that controls the rear down movement of the seat.

Chevrolet Corvette C5 DTC B2187 symptoms

Symptoms of DTC B2187 on a Chevrolet Corvette C5 may include:

• Seat not moving in the rear down direction
• Seat movement erratic or not responding
• Warning light on the dashboard related to the seat controls

Chevrolet Corvette C5 DTC B2187 causes

Possible causes of DTC B2187 on a Chevrolet Corvette C5 include:

• Short circuit in the wiring connected to the Seat Rear Down Switch
• Faulty Seat Rear Down Switch
• Issues with the seat control module

Chevrolet Corvette C5 DTC B2187 seriousness

While DTC B2187 may not directly affect the drivability of the vehicle, it can impact the comfort and convenience of adjusting the seat position. It is recommended to address this issue to ensure proper functioning of the seat controls.

How to diagnose DTC B2187 on Chevrolet Corvette C5

To diagnose DTC B2187 on a Chevrolet Corvette C5, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
2. Inspect the wiring connected to the Seat Rear Down Switch for any visible damage or shorts
3. Test the Seat Rear Down Switch for continuity and proper operation
4. Check the seat control module for any faults or malfunctions

How to fix DTC B2187 on Chevrolet Corvette C5

To fix DTC B2187 on a Chevrolet Corvette C5, you can try the following solutions:

1. Repair or replace any damaged wiring connected to the Seat Rear Down Switch
2. Replace the faulty Seat Rear Down Switch with a new one
3. If the issue persists, consider checking and potentially replacing the seat control module

How to erase DTC B2187 on Chevrolet Corvette C5

To erase DTC B2187 on a Chevrolet Corvette C5, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s computer. Once the issue has been addressed and fixed, clearing the codes will reset the system and turn off the warning light related to the Seat Rear Down Switch.