P0153 – Chevrolet Corvette C5 DTC

Chevrolet Corvette C5 DTC P0153 – HO2S Slow Response Bank 2 Sensor 1

DTC P0153 meaning on Chevrolet Corvette C5

DTC P0153 on a Chevrolet Corvette C5 indicates a slow response from the oxygen sensor (HO2S) located in Bank 2 Sensor 1. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) for proper air-fuel ratio adjustments.

Chevrolet Corvette C5 DTC P0153 symptoms

Symptoms of DTC P0153 on a Chevrolet Corvette C5 may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Poor fuel economy
• Rough idling or engine misfires
• Reduced engine performance

Chevrolet Corvette C5 DTC P0153 causes

Common causes of DTC P0153 on a Chevrolet Corvette C5 include:

• Failed oxygen sensor (HO2S)
• Wiring or connector issues in the oxygen sensor circuit
• Exhaust leaks near the oxygen sensor
• Engine running too rich or too lean

Chevrolet Corvette C5 DTC P0153 seriousness

While DTC P0153 may not cause immediate drivability issues, it can lead to poor engine performance and increased emissions if left unresolved. It is recommended to address this issue promptly to prevent further damage to the vehicle’s components.

How to diagnose DTC P0153 on Chevrolet Corvette C5

To diagnose DTC P0153 on a Chevrolet Corvette C5, follow these steps:

1. Use an OBD-II scanner to retrieve the trouble codes and freeze frame data.
2. Inspect the wiring and connectors of the Bank 2 Sensor 1 oxygen sensor for any damage or corrosion.
3. Check for exhaust leaks near the oxygen sensor.
4. Perform a visual inspection of the oxygen sensor for signs of contamination or damage.

How to fix DTC P0153 on Chevrolet Corvette C5

To fix DTC P0153 on a Chevrolet Corvette C5, consider the following steps:

1. Replace the Bank 2 Sensor 1 oxygen sensor if it is faulty.
2. Repair any damaged wiring or connectors in the oxygen sensor circuit.
3. Address any exhaust leaks near the oxygen sensor.
4. Ensure the engine is running at the correct air-fuel ratio.

How to erase DTC P0153 on Chevrolet Corvette C5

To erase DTC P0153 on a Chevrolet Corvette C5, you can use an OBD-II scanner to clear the trouble codes. After fixing the underlying issue causing the fault code, clearing the code will reset the Check Engine Light and monitor status. Make sure the repair has been completed successfully before clearing the code.

Recommended tools for Chevrolet Corvette C5 diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.