P0523 – Chevrolet Corvette C5 DTC

Chevrolet Corvette C5 DTC P0523 – Engine Oil Pressure (EOP) Sensor Circuit High Voltage

DTC P0523 meaning on Chevrolet Corvette C5

DTC P0523 on a Chevrolet Corvette C5 indicates a high voltage condition in the Engine Oil Pressure (EOP) Sensor Circuit. This means that the signal voltage from the EOP sensor to the engine control module (ECM) is higher than the specified range.

Chevrolet Corvette C5 DTC P0523 symptoms

Symptoms of DTC P0523 on a Chevrolet Corvette C5 may include:

  • Check Engine Light (CEL) illuminated on the dashboard
  • Low oil pressure warning light
  • Loss of oil pressure reading on the gauge
  • Engine running rough or stalling

Chevrolet Corvette C5 DTC P0523 causes

Common causes of DTC P0523 on a Chevrolet Corvette C5 include:

  • Defective EOP sensor
  • Wiring or connector issues in the EOP sensor circuit
  • Low engine oil level or oil pressure
  • Faulty ECM

Chevrolet Corvette C5 DTC P0523 seriousness

DTC P0523 should be addressed promptly as it can lead to potential engine damage if the oil pressure issue is not resolved. Driving with low oil pressure can cause engine components to wear prematurely or even result in catastrophic engine failure.

How to diagnose DTC P0523 on Chevrolet Corvette C5

To diagnose DTC P0523 on a Chevrolet Corvette C5, follow these steps:

  1. Use a scan tool to retrieve the DTC and freeze frame data
  2. Inspect the EOP sensor and its wiring for any visible damage
  3. Check the engine oil level and pressure to ensure they are within specifications
  4. Perform a continuity test on the EOP sensor circuit

How to fix DTC P0523 on Chevrolet Corvette C5

To fix DTC P0523 on a Chevrolet Corvette C5, consider the following:

  1. Replace the EOP sensor if faulty
  2. Repair any damaged wiring or connectors in the EOP sensor circuit
  3. Ensure the engine oil level and pressure are at the correct levels
  4. If necessary, replace the ECM

How to erase DTC P0523 on Chevrolet Corvette C5

To erase DTC P0523 on a Chevrolet Corvette C5, use a scan tool to clear the code after the underlying issue has been resolved. This will reset the Check Engine Light and allow for monitoring of the system to ensure the fault does not reoccur.

Recommended tools for Chevrolet Corvette C5 diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.