P1337 – Volkswagen DTC

Volkswagen DTC P1337 – CMP Sensor Bank 1 Short To Ground

DTC P1337 meaning on Volkswagen

DTC P1337 indicates a fault with the Camshaft Position (CMP) Sensor on Bank 1 in a Volkswagen vehicle. This fault code specifically points to a short circuit to ground in the CMP Sensor circuit on Bank 1.

Volkswagen DTC P1337 symptoms

Symptoms of DTC P1337 in a Volkswagen may include:

• Check Engine Light illuminated on the dashboard
• Engine running rough or misfiring
• Reduced engine performance
• Difficulty starting the engine

Volkswagen DTC P1337 causes

The common causes of DTC P1337 in a Volkswagen are:

• Faulty Camshaft Position (CMP) Sensor
• Short circuit to ground in the CMP Sensor circuit on Bank 1
• Wiring issues or poor connections in the CMP Sensor circuit

Volkswagen DTC P1337 seriousness

DTC P1337 should not be ignored as it can lead to engine performance issues and potential drivability problems. It is recommended to address this fault code promptly to prevent further damage to the vehicle.

How to diagnose DTC P1337 on Volkswagen

To diagnose DTC P1337 on a Volkswagen, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the CMP Sensor on Bank 1 for any visible damage or signs of wear
3. Check the wiring and connections in the CMP Sensor circuit for any issues
4. Perform a continuity test to check for a short circuit to ground in the CMP Sensor circuit

How to fix DTC P1337 on Volkswagen

To fix DTC P1337 on a Volkswagen, consider the following steps:

1. Replace the faulty Camshaft Position (CMP) Sensor on Bank 1
2. Repair any wiring issues or poor connections in the CMP Sensor circuit
3. Clear the fault code using a diagnostic scanner after the repair
4. Test drive the vehicle to ensure the issue has been resolved

How to erase DTC P1337 on Volkswagen

To erase DTC P1337 on a Volkswagen, use a diagnostic scanner to clear the fault code from the vehicle’s memory. After performing the necessary repairs and confirming the issue is resolved, clear the fault code to reset the Check Engine Light.