Volkswagen DTC P1631 – Accelerator Pedal Position Sensor 1 Signal Too High
DTC P1631 meaning on Volkswagen
DTC P1631 on a Volkswagen indicates that the Accelerator Pedal Position Sensor 1 signal is too high. This means that the signal being sent by the sensor is registering a higher value than what is expected by the Engine Control Module (ECM). The Accelerator Pedal Position Sensor is a crucial component that helps the ECM determine how much fuel to inject into the engine based on the driver’s input through the accelerator pedal.
Volkswagen DTC P1631 symptoms
Symptoms of DTC P1631 on a Volkswagen may include:
- Check Engine Light illuminated
- Reduced engine power
- Difficulty accelerating
- Poor fuel efficiency
Volkswagen DTC P1631 causes
The possible causes of DTC P1631 on a Volkswagen include:
- Faulty Accelerator Pedal Position Sensor
- Wiring or connector issues in the sensor circuit
- ECM software or hardware problems
Volkswagen DTC P1631 seriousness
DTC P1631 should be addressed promptly as it can lead to drivability issues and potential safety concerns. Ignoring this fault may result in poor engine performance and increased fuel consumption.
How to diagnose DTC P1631 on Volkswagen
To diagnose DTC P1631 on a Volkswagen, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
- Inspect the wiring and connectors related to the Accelerator Pedal Position Sensor for any damage or corrosion.
- Test the sensor’s output voltage using a multimeter to ensure it is within the specified range.
- If necessary, perform a throttle position relearn procedure using a compatible scan tool.
How to fix DTC P1631 on Volkswagen
To fix DTC P1631 on a Volkswagen, you can try the following:
- Replace the Accelerator Pedal Position Sensor if it is found to be faulty.
- Repair any damaged wiring or connectors in the sensor circuit.
- If the issue persists, consider reprogramming or replacing the ECM.
How to erase DTC P1631 on Volkswagen
To erase DTC P1631 on a Volkswagen, you can use a diagnostic scanner to clear the fault codes stored in the ECM. After addressing the underlying issue causing the fault code, clearing the codes will reset the Check Engine Light and monitor the system for any new faults.
Recommended tools for Volkswagen diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.